Suspension & Chassis
Air Springs
Ride Control Load-Assisting Adjustable Air Springs from JC Whitney’s extensive assortment of Car Suspension and Chassis help prevent your car from sagging when hauling a heavy load or while towing. They adjust to your car’s varying load conditions for improves comfort and control. You can inflate or deflate to adjust the spring rate, restore ride height and stop bounce, dip and sway. These easy to install car Air Springs from Air Lift® can easily carry weight up to 2500 lbs.
Adjustable Air Spring Sets help add up to 1,000 lbs. of load capacity to prevent damaging suspension drag and bottoming out. The polyurethane cylinders fit easily inside the existing coil springs without any need for special tools. The air pressure can be varied to accommodate additional loads and to achieve desired suspension stiffness. These easy to install Air Spring Sets also help improve handling and braking.
Electrical Air Control Kits help improve suspension, cornering and steering and are perfect for cars, station wagons, trucks, vans and RVs. They also help keep your car leveled when carrying a heavy load. These Control Kits maintain correct bumper height, exhaust system clearance and headlight aim. The heavy-duty compressor delivers up to 100 psi and the control unit with inflate/deflate buttons mounts easily under the dash. We also stock Air-Lift® On-Board Air Compressor Systems and Smartair Automatic Leveling Systems.
Ball Joints
Upper and Lower Ball-Joint Suspension Assemblies help eliminate noise, erratic steering and unstable front-end suspension caused by worn Car Ball Joints. The bearings are specially designed for better lubrication to all wear surfaces and reduce friction and wear to a minimum. The gaskets and rubber seats help keep the grease in and dirt and moisture out. We also stock EMPI Deluxe Mounting Kit and Prothane™ Black Polyurethane.
Bump Stops & Suspension Bumpers
Upper A-Arm Suspension Bumper Weatherstrippings from Metro Molded Parts make perfect replacements for your cars damaged original parts. These highly durable Suspension Bumper Weatherstrippings are made of top-quality materials and are very easy to install.
Bushings
Complete Polyurethane Suspension Bushing Kits from Bugpack allows easy and complete conversion of your suspension to polyurethane. These Suspension Bushing Kits outperform and outlast rubber bushings for greater consistency and more accurate handling.
Urethane Front End Bushing Sets from Bugpack are specially designed to help eliminate excessive front-end play, impaired handling and to absorb the shocks that can damage the torsion arms. These highly durable Front End Bushing Sets include 2 upper bushings and 4 lower bushings.
Control Arm Bushings help replace worn original bushing perfectly for more responsive handling and increased control. They also ensure proper steering, increases driving safety and prevent uneven tire wear. These Control Arm Bushings are made from rubber and cold-rolled steel that makes it stronger than the original.
Our wide selection of Car Bushings also includes Full Suspension Bushing Kits, Complete Polyurethane Bushing Kits, Suspension Bushings, Front Suspension Control Arm Bushing Kits, Rear Trailing Arm Bushing Sets, Front Strut Rod Bushing Kits and Urethane Control Arm Bushing Kits. You can opt for all these and more from top brands like Dee Engineering, Prothane™ and Bugpack.
Camber Kits
EZ Cam XR™ Camber Kits help correct the handling and ride of your lowered car. They also help reduce wear on expensive performance tires. These easy-to-install Camber Kits allows ±1.75° of camber correction.
Extreme Camber Kits from Sprint Performance Suspension are a must with performance tires and lowering springs. They ensure longer life and high-quality performance for your expensive tires. These kits come with a superior design and construction for durability.
Camber Compensators can be used to prevent the outer rear wheel from folding up during aggressive cornering that can result in loss of control and possible rollover. They are specially designed for cars with swing-axle rear suspension that can’t accommodate an anti-sway bar. The Camber Compensator is a steel leaf spring that is equipped with polyurethane axle pads on the outside of each end. We also stock Progress High-Performance Camber Kits and Specialty Products™ Performance Camber Kit.
Coil Springs
Extra-High-Lift Coil Springs provide increased weight transfer for competition and improve traction for faster acceleration. They also eliminate clearance problems when oversized wheels are used. Made from top-quality materials, these car Coil Springs are very easy to install.
Adjustable Coilover Spring Kits from Arospeed can be used to drop or raise the front and rear of your car up to 4". The kit includes 4 linear-rate springs, 4 threaded sleeves, 4 locking perches, 4 urethane bushings and 2 wrenches. Easy to install, these Arospeed Coilovers are very simple to use.
Eibach Pro-Kit Lowering Spring Sets help improves your car’s look by reducing the ugly fender gap for a bold and more aggressive stance. These Spring Sets lower the center of gravity to reduce body roll in turns, dive during braking and squat during acceleration.
Sport Springs are a must for anyone looking for maximum suspension performance. They help increase the spring rates and allow you to sport tune your suspension and minimize body roll. The progressive dual-rate springs are the perfect compromise between ground clearance, ride quality and improved handling.
We also stock Eibach Lowering Springs, Coil Spring Spacers, Coil Spring 2-Way Adjusters and Stabilizers, Quick-Change Helpers, Ride Control Helpers, Ride Control Helpers, Lowering Coil Springs, Eibach Sportline Lowering Spring Sets and Adjustable Spring Plates. You can pick all these and more from renowned brands like Bugpack, CP Auto Products, Eibach, Gold-Line and Suspension Techniques.
Idler Arms
Idler Arms from JC Whitney are perfect for all rear-wheel drive cars. They assist the pitman arm by supporting the steering linkage as it moves in the direction controlled by the steering gear. Easy to install, these Idler Arms also make perfect replacements for worn or loose Idler Arms.
Leaf Springs
Leaf Spring Helpers minimize body roll and sway and also prevent sag and bottoming. They help stabilize your car for a smooth, comfortable ride, even when carrying heavy loads or pulling a trailer. These Leaf Spring Helpers provide added clearance for large or custom wheels and are very easy to install.
Loadpro Full-Time Helper Spring Kits can be used to control dangerous rear-end bottoming and are perfect when carrying heavy loads. These adjustable Helper Spring Kits can increase the level-load-carrying capacity up to 2,500 lbs.
Leaf Spring Perches from Warrior™ Products are a must when converting your leaf springs to an over-axle application or when replacing collapsed perches. These easy to install Leaf Spring Perches work best when installing wide leaf springs or relocating leaf springs.
We also stock Leaf Spring Shackle Sets, Leaf Spring Adjustable Helpers, Extra-High-Lift Rear Leaf Springs, Polyurethane Leaf Springs and Leaf Spring Mounting Kits. You can pick car Leaf Springs from top brands like Dee Engineering, Hellwig® Products, Omix Ada®, Steelcraft and Warrior™ Products.
Lowering Kits
Coil Spring Lowering Kits from Hellwig® Products help lower the front or the rear coil springs up to 3 inches without cutting, welding or heating. These Car Lowering Kits include 4 compressor assemblies to lower one pair of coil springs. We also stock Street Master Suspension System Kits that are specially designed to work together to ensure the best performance possible.
Power Steering & Gear Box
Power Steering Return Hoses are built of black high-quality nitrile tube to resist power steering fluid. They come with a neoprene cover that offers maximum resistance to oil, abrasion and can resist temperatures up to 250° F. These Power Steering Return Hoses are strong, highly durable and very easy to install. We also stock Steering Gear Boxes and Steering Shafts.
Rack & Pinion
Dune Buggy Racks and Pinions from EMPI help improve steering for greater off-road control. The kit includes rod ends, bellows and rack boots. The heavy-duty tie-rod assembly and heavy-duty U-joints are designed for use with Dune Buggy Racks and Pinions. These compact, lightweight steel Racks and Pinions are very easy to install. We also stock Rack and Pinion Kits from Unisteer Performance Products that dramatically reduce the steering effort and ensure proper steering for improved handling.
Shocks & Struts
Premium Gas-Charged Shocks from Gabriel® resist compression and aid rebound to keep your tires in contract with the road. The high-pressure nitrogen gas charge ensures superior handling, stability and control without the loss of highway driving comfort. The pressure also reduces the fluid foaming that causes faulty dampening and fade. The all-weather fluid provides more consistent performance even in extreme temperatures and contains additives for extended service life.
Heavy-Duty Shocks with Overload Springs from Gabriel® help keep your car leveled for a more comfortable ride. They also stop sagging, bottoming and side sway. These Gabriel® Shocks come with calibrated, variable-rate tempered coil springs that react automatically to light or heavy loads.
Gas-Charged Performance Shocks from EMPI help prevent costly damage to the suspension and the tires. They have a shock piston that automatically adjusts to changing road conditions- On a smooth road, the piston travels freely for a comfortable ride and on a rough road, the piston compresses more rapidly to maintain the tire / road surface contact for better handling.
Air-Adjustable Shock Absorbers are great for heavy loads or extra passengers. They help add extra carrying capacity and keep your car leveled with a cushion of air. These Car Shock Absorbers from Gabriel® increase the tire clearance and improve traction and are very easy to install.
Upper Front Strut Mounts are a must when installing new struts or cartridges. These car Strut Mounts from our huge collection of Shocks and Struts help stop rattles and bumping caused by worn originals.
Gabriel® Gas Ryder® Strut Assemblies resist the compression and reduce rebound to keep your tires in contact with the road. The pressure also stops the fluid foaming that reduces dampening and causes fade. The exclusive Gabriel® velocity sensitive technology is instantly self-adjusting, resulting in faster reaction to the performance demands of your car. The all-weather fluid provides more consistent performance even in extreme temperatures and contains additives for extended service life. The gas charge allows faster response to the changing road conditions and ensures superior handling, stability and control without the loss of highway driving comfort!
Gabriel® Readymount™ Pre-Assembled Struts make perfect replacements for your car’s worn strut assembly components. They increase the longevity of your total strut job by eliminating the weak links. They include strut unit, insulators, coil spring, strut mount and strut cushion boot and bumper.
We also stock Performance Shocks, Tokico Hp Series Performance Shocks and Struts, Gas-Charged Shocks and Strut Cartridges, Bilstein® 5100 Series Shocks, KYB® AGX Adjustable Gas Shocks, Extra Heavy-Duty Air Shocks, Air Shock Adapter Kits Adjustable Overload Shock Absorbers, Shock Reservoir Mounts, Lower Shock Extensions, Swing-Axle Suspension Shock Mount Kits, Strut Cartridges, Tokico Illumina Adjustable Performance Struts, Strut Inserts and Gas Struts. You can choose Car Shocks and Struts from popular brands like Bilstein®, EMPI, Gabriel®, KYB®, Dee Engineering and Air Lift®.
Steering Column & Shaft
Chrome-Plated Heavy-Duty Steering Shafts from EMPI are a must when off-roading. The shaft supports with bearing are a must when you have a full roll cage and they also ensure easy installation of steering shaft. These strong and durable Steering Shafts add a bright custom touch to your car.
Steering Stabilizers & Dampers
Center Links can be used to replace worn center links for safe, smooth operation and an improved ride. The new links eliminate erratic steering and front-end wobble and assure positive front-end adjustment.
EMPI IRS Box Kits are perfect to strengthen the IRS trailing arms of your Car for off-road use. These Box Kits include six pre-cut steel pieces that can be welded onto the inside back, top and bottom of stock IRS rear trailing arm to improve strength and rigidity significantly. They are economical alternatives to custom-fabricated trailing arms.
Miscellaneous Weatherstripping from Metro Molded Parts are an economical way to repair damaging rain and annoying wind leaks. We also stock Hydraulic Steering Stabilizers, Polyurethane Dust Boots for Extra Heavy Duty Steering Stabilizers, Steering Shaft Supports with Bearings, Red Shock Boots, King Bolt Sets, Link Pin Sets and Billet Steering Damper Mounts. You can select all these and more from superior brands like EMPI, Metro Molded Parts, Rancho® Suspension and Rough Country® Suspension.
Strut Bars & Suspension Braces
DC Sports Carbon-Fiber-Look Steel Strut Bars come with a unique dual bar design that virtually eliminates body flex for improved handling and drivability. Constructed of top-quality steel, these Strut Bars can be easily and directly mounted to the strut towers without any modifications.
Strut Tower Braces from Vibrant Performance are perfect for cars with stiffened suspension or larger wheels and tires. They virtually eliminate all body flex for easier handling and better ride. Made of solid billet aluminum, these lightweight and highly durable Strut Tower Braces are wider and stiffer than most strut braces available.
Quick Release Kits from Whiteline allow quick removal of your strut bar for easy access to chassis accessories and upgrades. They are ideal for wagons/hatches and coupes rear strut braces, internal pillar braces and under bonnet strut braces. These aluminum Quick Release Kits are designed to fit 90% of sway bars available in the market.
Our assortment of car Strut Bars and car Suspension Braces also includes Strut Tower Braces and Lower Tie Bars, Chrome-Plated Rear Engine Braces, Chrome-Plated Strut Stabilizer Bar Kits, Front Upper Strut Bars, Front Strut Bars and Reworks Heavy-Duty Strut Bars. You can select all these and more from top brands AC Autotechnic, APC™, DC Sports, EMPI, Neuspeed®, Freedom Design® and Pilot™ Motorsports.
Sway Bars & Anti-Sway Bars
Sway Bars from Hellwig® Products help reduce sway and body roll. They come with 3 integral mounting points for precision tuning and increased handling control. Easy to install, these car Sway Bars come with all the necessary hardware and instructions for easy installation.
Front and Rear Anti-Sway Bar Kits from Suspension Techniques help improve handling and steering while minimizing roll and sway. They are tighter-than-normal bends and allow the bars to hug the undercarriage for more ground clearance, less chance of damage and easier installation.
Non-Adjustable Anti-Roll Bars from Progress Group help reduce body roll for better tire contact and cornering speed as well as increased traction and torsional stiffness. The new roller-groove bushing design reduces friction and maintains lubrication for smooth and quiet performance.
We also stock Polyurethane Sway Bar Bushings, Polyurethane End Link Bushings, High-Performance Sway Bars, Hellwig Sport Tech™ Performance Anti-Sway/Roll Bars, Weapon-R X-Cross Strut Bars and BBK Gripp® Triangular Strut Tower Braces.
Tie Rods & Sleeves
Chrome-Plated Tie Rods from EMPI make perfect replacements for stock Tie Rods on your Type I chassis. The Tie Rods with dampers can be used for smoother steering on-road and the Tie Rods without dampers can be used for stiffer off-road steering.
Tie Rod Ends help replace worn tie rod for proper steering, increased safety and to prevent uneven tire wear. On cars with rack and pinion steering, the Inner Tie Rod End is replaced by an inner socket. These Tie Rod Ends include grease fittings, cotter pins and washers or nut. Our collection of Car Tie Rods and Tie Rod Sleeves also includes Inner Tie Rod Ends, Tie Rod Assemblies and Polyurethane Boot Kits.
Traction & Torsion Bars
30" Heavy-Duty Universal Traction Bars from Lakewood Industries® are designed for use on any car leaf spring . They are fabricated of thick 11-gauge rectangular steel tubing and are recommended for the more serious-minded competitor! These full-length Lakewood Traction Bars feature longer MIG welded mounting brackets and heavy-duty 1/4" steel spring clamps.
Bolt-On Lift Bars/Lower Control Arms help eliminate wheel hops. They utilize the torque on the axle to help lift the chassis, so the opposite force can plant the tires for improved traction. Constructed of top-quality materials, these Bolt-On Lift Bars/Lower Control Arms resist stone chips, corrosion and rusting.
Torsion Bars from Bugpack help increase spring rate and roll stiffness and reduce bottoming out of suspension. They minimize weight transfer and body roll and improve ride, handling and cornering ability. The increased spline length strengthens the coupling at each end. These lightweight Torsion Bars offer maximum protection against rust and corrosion.
We also stock chromed Torsion Arm Covers, Universal Performance Traction Bars, Front End Clamps, Heavy-Duty Front-End Supports, Heavy-Duty Upper Control Arms For Racing, Adjustable Rear Panhard Rod, Mr. Gasket® Lakewood Traction Bars, Rear Lower Control Bars
